Tutorial of All Recorder

Using auto split
Record from microphone
Record from videotape
Record from streaming internet

1.Record from microphone

Most sound cards provide the ability to receive sound input from a microphone through the sound card microphone port. This is useful for recording voice or sounds to your computer.

1. Check Your Hardware: If your microphone has never worked, or it stopped working, first check the physical connection of the microphone. Verify that it is firmly plugged into the microphone port instead of the headphone or speaker port. If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer.

2. Open All Recorder, click "Setting" button to select or create a destination sound file and its format(if you check on the fly).

3. Click "Record Volumn control" button to select the recording properties in the dialog box. Select the microphone device, adjust the recording volume for the highest possible performance. You might see other devices, such as CD-Player or Synthesizer (MIDI), in the recording panel, uncheck all non-essential devices, this cuts down background noise.

4. Click "Record" button, and then speak into the microphone. If the microphone is plugged into the correct jack, the wave patterns on the display should move up and down. If it does not move, sound is not making it through your microphone. If the wave does move, press "Stop" button, and then press "Play" button to listen to your recording. The recording is the destination sound file you selected.

2.Record from videotape

You can get the audio from videotape to mp3 , wma , ogg , vqf, wav files with All Recorder.

1. Connect the left and right audio-out terminals on the VCR to the line-in or microphone terminal on the sound card.

2. Open All Recorder, click "Setting" button to select or create a destination sound file(Mp3 or Wav).

3. Click "Record volume control" button to select the recording properties in the dialog box. Select the line-in or microphone device, adjust the recording volume for the highest possible performance. You might see other devices, such as CD-Player or Synthesizer (MIDI), in the recording panel, uncheck all non-essential devices, this cuts down background noise.

4. Now start the playback of the VCR and click the "Record" button in All Recorder. You should see a wave pattern display of the audio as it is playing. If the volume settings are too high, you see the wave patterns being clipped off and appearing to fill the recording window. If the settings are too low, you see only very small variations in the wave pattern. If the sound is being clipped off because the volume is too high, move the line-in or microphone volume setting down until most of the volume range is displayed without clipping. If the sound is too low, increase the volume setting. Ok, here's the trick with the line-in or microphone input. If the recording effect is satisfactory, then stop the recording test by clicking "Stop" button.

5. Depending on your sound card and the volume of the audio source, you might not get enough volume using the line-in input. In this case try the microphone input, as the volume sensitivity through the microphone input is generally greater than with the line-in input.

6. OK, let's rewind the tape and start the playback from the point you want to record. Hit the "Record" button and stand by. When you want to stop recording, just click "Stop" button, and the destination sound file is there.

3.Record from streaming internet

1. Open All Recorder, click "Setting" button to select or create a destination sound file and its format(if use on the fly).

2. Click "Record volume control" button to select the recording properties in the dialog box. Select the Stereo Mix device or the equivalent, adjust the recording volume for the highest possible performance. You might see other devices, such as CD-Player or Microphone, in the recording panel, uncheck all non-essential devices, this cuts down background noise.

3. Now start the playback of the WinAmp or the stream audio from Internet and click the "Record" button in All Recorder. Adjust the volume setting by observing a wave pattern display of the audio as it is playing. You can pause the process of recording by clicking the "Pause" button any time you want and then resume it by clicking the "Resume" button.

4. When you want to stop recording, just click "Stop" button, and the destination sound file is there.

4.Using auto split

1. Open All Recorder, click "Setting" button.

2. Click "enable Auto splitl" button to turn on this feature.

3. Choose a kind of gap. The first mothod is" by time " , which will split your recording in a static time cycle. The second is "by gate". Gate has two parameters, noise limit and time limit.auto split occurs when the recording content is lower than the noise limit and longer than the time limit. To set up gate , click "Set" button

4. You can modify the peak gate percentage and time limit here.Most sound card has background noise.You may click"pick background noise" to get the noise of your sound card.


 
 


 
1998-2004 (C) 1st Benison Software Company. View our term of use